Integrated windsock

Integrated windsock

The integrated wind pocket consists of a base, a main rod, a moving rod and a wind bag. The main part is made of high quality stainless steel material, and the moving rod part is made of high quality stainless steel waterproof bearing, which has the characteristics of small starting wind speed and durability. Cloth air bag is made of imported thick cloth, nylon and other lightweight high-strength waterproof cloth, which has the advantages of high flexibility and long service life. The product is easy to install and convenient to transport. Widely used in meteorology, chemical industry, mining area, agriculture, oil field exploration and other industries.

Air bags can be customized according to customer needs. Such as: red and white, with reflective strip (yellow or red), size customization, etc.

Installation guidance

Installation location selection: This product is suitable for installation on the flat roof of a building or on the flat surface of an iron tower. The surrounding area should be relatively open and easy for ground personnel to observe.

Installation: 8 for cement floor × Fix the base with 80 expansion bolts; Fix the base with screws at the plane of the iron tower; Install the main rod and base in place, and then install the upper moving rod/support ring in sequence.

Attention: The main pole should be installed perpendicular to the ground. If the installation site has a large slope, a 30 mm diameter should be cast first × 30 cement platform installation, if there is only a small angle of inclination, it can be adjusted by adding washers or other adjustments to the lower part of the base.

Lightning protection measures: If at a high place, the base should be firmly connected to the lightning rod and lightning strip.